How To Set Time For Armitron Watch

Download Article

Download Article

Armitron is a popular scout brand that carries many styles of analog and digital watches. While each model is slightly different, nigh follow like instructions when you're trying to ready the time and date. Armitron digital watches utilise buttons to modify the time and appointment, while analog watches utilize a rotating crown slice. Once you lot set your Armitron watch, you lot won't lose rail of the time again!

1. 1

   Hold the Reset button until the watch beeps. Locate the Reset button on the pinnacle left side of your Armitron watch. Hold the push for about three seconds or until it beeps. You should notice numbers on your screen start flashing.^[1]

   • Depending on your watch model, the button may say Fix instead of Reset.

2. 2

   Press the Way push to change between the hours, minutes, day, and engagement. The Mode button is ordinarily constitute on the lesser right side of your Armitron sentry. When you press the manner button, the section that's flashing on your screen will change. This manner, yous can hands switch betwixt irresolute the hour, minutes, day, and date. Go along pressing Mode until you reach the value you demand to modify.^[2]

   • Whatever is flashing on your sentinel is the value you're changing.

   Advertisement

3. 3

   Increase the number by pressing the St/Stp button. Locate the St/Stp button on the top right side of the Armitron scout. Whenever you lot want to alter a value, printing the button until you lot reach the right number. If you need to reach an earlier time or twenty-four hours, keep pressing the button until information technology cycles over.^[iii]

   • Check if y'all accept the time set as AM or PM on your lookout man so all of the information is accurate.
   • On some models, like the WR330, the St/Stp button may be labeled Adj.

4. iv

   Press the Reset push button in the tiptop left when you're finished. Later y'all've ready all of the information correctly, press the Reset button to lock in all of the information. Check your lookout man over the course of the next mean solar day to make certain the time is correct.^[4]

   • If there is a fourth button on your lookout man, it is non used to set the time or date.

Advertisement

1. i

   Pull out the crown on the side of the Armitron watch until it clicks one time to gear up the appointment. The crown is the dial on either the left or right side of the watch face. Pinch the crown in between your fingers and pull it out until it clicks once. If you hear more than 1 click, push button the crown back in and pull it out slowly.^[5]

   • If your watch doesn't display the date, then the crown will only pull out once to set the time. You may skip this footstep.

2. ii

   Turn the crown until the correct date appears in the window. Rotate the crown clockwise or counterclockwise depending on your watch model. Go along turning information technology until the correct appointment is in the window on your scout face up. If you just needed to change the date, push the crown all the way in to set information technology.^[6]

   • Avert adjusting the engagement on your watch between 11 PM and 5 AM since that's when information technology advances to the next twenty-four hours.

3. 3

   Pull the crown until information technology clicks twice to conform the day of the week and fourth dimension. If you lot accept a watch that displays the day/date, pull the crown until it clicks twice. If your watch doesn't take that display, simply pull the crown until it doesn't go any further.^[7]

4. 4

   Rotate the crown until the twenty-four hour period of the week is correct. Turn the crown clockwise or counterclockwise depending on the watch model you lot're using. Spin the hands for ii full rotations around the watch confront to move frontward past 24 hours. Keep turning the crown until you attain the correct twenty-four hours of the calendar week.^[8]

   • Don't ready the day of the week between xi PM and v AM since this is when the spotter will advance it.

5. 5

   Arrange the time by rotating the crown. In one case y'all accept the mean solar day of the week and date set, turn the crown until the hands point at the correct fourth dimension. Become every bit shut as you can to the right time so your sentry is accurate within a infinitesimal or two.^[nine]

   • The hands won't starting time moving on their own until you press the crown back in.
   • If your clock has a military time dial, brand sure it's correct compared to the current time.

6. 6

   Push the crown all the way in to prepare the time. Once you've made all of your adjustments, press the crown all the manner in so information technology starts again. Bank check the watch periodically throughout the day to make sure it maintains the correct time.^[x]

   • If the picket keeps falling behind, you may need to supplant the battery.

7. seven

   Finished.

Ad

Add New Question

• Question

  I have an Armitron 45/7041, a sports watch with red around information technology. The alarm goes off every 3-ish minutes. How do I stop information technology?

  

  Press mode until a1 a2 or a3 pops upwards then where it says CHRONO adj or set and fidget with it and information technology should work.

• Question

  I have an Armitron Sports watch, blackness resin strap band with a silvery plate ontop. The model says 45/7042. How do I modify the hour format from 24 to 12?

  

  Go to setting the time and then hours. Alter the hour time until y'all get to the time you want. It will cycle through Military machine time, then AM, then PM.

• Question

  I need to reset the day; it says Thursday, but information technology'southward Friday. How tin I practise that?

  

  Press mode until it opens the time change, then press the right-side buttons. First minutes will be flashing; press again for hours, and and then again to allow you lot to change 24-hour interval of the calendar week.

• Question

  How do I set an alarm on my Armitron scout?

  

  Hold down the A push button to show the alarm, and and then utilise the same buttons you'd use to alter the time to set it.

• Question

  How do I find the manual for my Armitron watch?

  

  Information technology should exist in the box it came in. If non, visit the Armitron website and locate the manual for your model.

• Question

  How can I shut the alarm off and de-actuate the warning symbol on my Armitron watch?

  

  Hold the reset and the st/stp button (the 2 tiptop ones) until it beeps twice. Then the alarm is off. The alert symbol automatically goes away when the alarm is off.

• Question

  How practice I stop my alarm from going off on my Armitron watch? It was accidentally gear up.

  

  Concord down the reset and the st/stp (the top 2) until the watch beeps twice. Once information technology beeps, the warning is off.

• Question

  How exercise I turn off the hour chime?

  

  Concur downwards the reset and the st/stp (the top two) until the watch beeps twice. Once it beeps, the alarm is off.

• Question

  How practise I shut off the alarm on my Armitron watch?

  

  Agree down the reset and the start/stop [the tiptop 2] until the spotter beeps twice. One time it beeps, the alarm is off.

• Question

  How can I change my lookout man and then that it doesn't display the fourth dimension in the UK, and how practice I access the stopwatch?

  

  From the normal time display, press the Style button. That'southward all yous need to do.

Show more answers

Enquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertising

• Type in the style number on the dorsum of your picket into the Armitron website to find a digital version of that model's instruction manual.^[11]

Thanks for submitting a tip for review!

Advertizement

About This Article

Commodity Summary X

If you need to prepare an Armitron digital watch, showtime by belongings the Set or Reset push button until the watch beeps, which should take nearly 3 seconds. Once you hear the beep, you can use the Mode button on the bottom right side to cycle through the hr, minutes, twenty-four hour period, and appointment displays. Keep pressing the Mode push until the value you demand to change is highlighted, then increment the number by pressing the St/Stp push button. When your sentry is displaying the correct value, printing the Reset button again to lock in all of your changes. For more help, like how to change the time and date on an analog Armitron watch, read on.

Did this summary help yous?

Thanks to all authors for creating a folio that has been read 356,408 times.

Did this commodity help y'all?

Source: https://www.wikihow.com/Set-an-Armitron-Watch

Share this post